Oracle Database Appliance X6-2-HA Owner's Manual page 103

8. Thread the four M4 x 10 flathead locking screws into the four adapter brackets
[1]).
These screws prevent the shelf rails from accidentally lifting out of the adapter brackets.
"Install the System Into a Rack" on page 103
See Also
Install the System Into a Rack
Before you begin installing your Oracle Database Appliance Version 1 into a rack, perform the
Before You Begin
steps in
1. Raise the system to slightly above the shelf surfaces.
Use a mechanical lift if possible.
"Install Rackmount Hardware Into a Rack" on page
Install the System Into a Rack
96.
Chapter 4 • Installing the System Into a Rack 103