Oracle Database Appliance X6-2-HA Owner's Manual page 95

Staff, Tools, and Equipment Required to Rackmount the
System
Personal injury or equipment damage. Use a mechanical lift to install
Caution -
the system or follow the precautions in
Weight" on page 95.
Before starting the installation, gather the staff, tools, and equipment required to rackmount the
system.
Staff, Tools, and Equipment
Four trained staff
No. 2 10-inch Phillips screwdriver
Mechanical lift
Compatible four-post rack
Rackmount kit
Transportation kit
Antistatic wrist strap and antistatic mat
Removing Components to Reduce System Weight
Before installing Oracle Database Appliance Version 1 into a rack, you can remove components
to reduce the weight of the system so that two persons can lift the system into the rack.
Removing system components reduces the weight to approximately 96 pounds (43.5 kg).
Remove the following components to reduce the system weight:
Server nodes
■
Power supplies
■
Because of their light weight, you do not need to remove filler panels from the system.
Note -
For instructions on removing components from the system and associated safety information,
see the Oracle Database Appliance Service Manual.
Add a Storage Expansion Shelf Into an Existing System
"Removing Components to Reduce System
Notes
Four people are needed to lift or transport the system.
Note - If a mechanical lift is available or components
have been removed from the system, it is safe for two
people to lift or transport the system.
A magnetic tip is recommended.
Strongly recommended. If not available, reduce the
weight of the system. See
Reduce System Weight" on page
See "Rack Compatibility Requirements" on page
See "Rackmount Kit Contents" on page
See "Transportation Kit Contents" on page
Required only if you remove system components.
Chapter 4 • Installing the System Into a Rack
"Removing Components to
95.
60.
93.
108.
95