Oracle Database Appliance X6-2-HA Owner's Manual page 88

Install the Oracle Database Appliance X3-2/X4-2 DE2-24P Storage Shelf Into a Rack
2. Carefully slide the storage shelf onto the shelf rails until it is fully seated in the
rack.
Caution -
supply/fan module.
Caution -
you are using three persons, use two to lift the storage shelf into place, and a third to check that
it is resting securely on the rails before releasing it.
3. Pull the storage shelf partway out of the rack until it is approximately 7.8 inches
(200 mm) out of the rack.
Tighten the four screws that fasten the rails to the rack (two in front, two in
4.
back).
88 Oracle Database Appliance Owner's Guide • March 2017
Number
1
2
Equipment damage. Do not lift the storage shelf using the handles on the power
Personal injury or equipment damage. Use a mechanical lift, or three persons. If
Description
Pins (replace location pegs)
Rear mounting screw