Cautions And Notes - MIMAKI Tx300P-1800B Operation Manual

Color inkjet printer
Hide thumbs Also See for Tx300P-1800B:
Table of Contents

Advertisement

CAUTIONS and NOTES

Warning
Disposition of this machine
• Consult your sales or service representative for proper
disposal of this machine. Otherwise, commission an
industrial waste disposal company.
Protection of media from dust
• Store media in a bag. Wiping off dust accumulated on media
will adversely affect the media due to static electricity.
• When leaving the workshop after the working hours, do not
leave any media on the roll hanger. If any media is left on the
roll hanger, it can get dusty.
Periodic replacement parts
• Some parts of this machine must be replaced with a new
one periodically by service personnel. Be sure to make a
contract with your distributor or dealer for After sale service
to ensure a long life of your machine.
Handling of media
• Use media recommended by MIMAKI to ensure reliable,
high-quality printing.
• Pay attention to the expansion and contraction of the media.
Do not use media immediately after unpacking. The media
can be affected by the room temperature and humidity, and
thus it may expand and contract.The media have to be left in
the atmosphere in which they are to be used for 30 minutes
or more after unpacked.
• Do not use curled media.
The use of curled media can not only cause a media jam but
also affect print quality.
Straighten the sheet of media, if significantly curled, before
using it for printing. If a regular-sized coated sheet of media
is rolled and stored, the coated side has to face outside.
Handling of ink packs
• The safety evaluation of this machine assumes that the ink
recommended by this company is used. For safe usage of
this machine, use the ink recommend by this company
• Never refill the ink pack and white ink cartridge with ink.
Refilled ink cartridge can cause a trouble. Remember that
MIMAKI assumes no responsibility for any damage caused
by the use of the ink cartridge replenished with ink.
• If the ink cartridge is moved from a cold place to a warm
place, leave it in the room temperature for three hours or
more before using it.
• Open the ink cartridge just before installing it in the machine.
If it is opened and left for an extended period of time, normal
printing performance of the machine may not be ensured.
• Make sure to store ink packs in a cool and dark place.
• Store ink packs and waste ink bottle in a place that is out of
the reach of children.
• Be sure to thoroughly consume the ink in the ink cartridge,
once it is opened, within three months. If an extended period
of time has passed away after opening the cartridge tank,
printing quality would be poor.
• Neither pound the cartridge nor shake it violently, as doing
so can cause leakage of ink.
Warning
• Consult your sales or service representative for proper
disposal of ink cartridge, ink pack, and waste ink.
When you dispose them by yourself, follow the regulations
stipulated by the industrial waste disposer or the country or
region you live in.
• When you dispose the belt washing liquid, ask the industrial
waste disposer to proceed or do by yourself following the
local regulations of each country.
• Do not leave the media with the heater ON for a long time.
Notes on maintenance
• It is strongly recommended to use the machine in a room
that is not dusty.
• Keep the front cover closed even when the machine is not
printing. If not, dust can accumulate on the nozzles in the
heads. Dust in the heads can also cause drops of ink to fall
suddenly down on the media during printing. In such a case,
be sure to clean up the heads. (
• When cleaning the ink-station or the heads, make sure to
wear the attached gloves and goggles.
• Perform wiping (removal of dust and paper powder) of the
capping station and wiper frequently.
Cautions on Installation
CAUTION
A place exposed to direct
sunlight
A place that vibrates
A place where temperature or
humidity varies significantly
•Use the machine under the
following environmental
conditions:
•Operating environment:
20 to 30 °C
(68 to 86 °F)
35 to 65 % (Rh)
Safety Precautions
P.4-13)
On an inclined surface
A place exposed to direct air flow
from an air conditioner or the like.
Around a place where fire
is used
1
2
3
4
5
6
viii

Advertisement

Table of Contents
loading

Table of Contents