Table of Contents
Advertisement
02
Connections
Easy connections
The setup described below is a basic setup that allows
you to watch and record TV programmes, and play discs.
Other types of connections are explained starting on the
following page.
Important
• These connections use SCART cables (not supplied).
If your TV (or VCR) does not have a SCART
connection, and you want to use the supplied audio/
video cable, see Basic connections on page 10.
• The AV1 (RGB)-TV AV connector can output ordinary
(composite), S-video or RGB video, plus stereo
analog audio. The AV2 (INPUT 1/DECODER)
connector accepts ordinary, S-video and RGB video
input, as well as stereo analog audio. See AV1 Out
and AV2/L1 In on page 140 for how to setup these
options.
• Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
From antenna output
To recorder's
antenna input
AV2 (INPUT 1/
DECODER)
AUDIO
VIDEO
R
L
ANTENNA
IN
S-VIDEO
INPUT 3
OUTPUT
OUT
Y
P
P
B
R
COMPONENT VIDEO OUT
AV1 (RGB) - TV
TV
1
Connect your TV antenna to the recorder and TV.
See Connecting a TV antenna on page 49 for details.
• If you want to incorporate a VCR in your setup, connect
it before the recorder (i.e., between the antenna wall
outlet and the antenna input on the recorder).
50
En
1
Antenna/cable TV
To antenna input
wall outlet
VCR
From SCART AV
connector
3
DIGITAL
AUDIO OUT
AV 2 (INPUT 1/DECODER)
HDMI OUT
COAXIAL
ANTENNA(DIGITAL)
G-LINK
IN
OUT
IN
5 V
30 mA
CONTROL
AV 1 (RGB) – TV
2
To SCART AV
connector
2
Use a SCART cable (not supplied) to connect the
AV1 (RGB)-TV AV connector on this recorder to the
SCART AV connector on your TV.
3
Use another SCART cable to connect the AV2
(INPUT 1/DECODER) AV connector to a SCART AV
connector on your VCR.
Tip
• This recorder has a 'through' function which allows
you to record a TV programme from the built-in TV
tuner in this recorder while watching a video playing
on your VCR (To use this feature when the recorder is
in standby, Power Save must be set to Off — see
Power Save on page 137).
Using the S-video or component
video output
If you can't use the SCART AV connector to connect your
TV to this recorder, there are standard audio/video output
jacks, as well as an S-video and component video output.
To component video input
To audio input
2
AUDIO
OUTPUT
AUDIO
VIDEO
R
L
ANTENNA
IN
AC IN
S-VIDEO
OUT
Y
P
B
P
R
COMPONENT VIDEO OUT
COMPONENT
VIDEO OUT
1
Connect the S-video or component video output
to a similar input on your TV.
For an S-video connection, use an S-video cable (not
supplied) to connect the S-VIDEO OUTPUT jack to an S-
video input on your TV.
For a component video connection, use a component
video cable (not supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video input on your TV.
See also Component Video Out on page 139 for how to set
up the component video output for use with a progressive
scan-compatible TV.
To video input
TV
1
S-VIDEO
OUTPUT
DIGITAL
AUDIO OUT
INPUT 3
AV 2 (INPUT 1/DECODER)
HDMI OUT
COAXIAL
ANTENNA(DIGITAL)
G-LINK
IN
OUT
IN
OUTPUT
CONTROL
5 V
30 mA
AV 1 (RGB) – TV
AC IN
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
