Pioneer RCS-LX60D Operating Instructions Manual page 57

Getting started
ENTER
8 Select the analog TV (A.TV) Auto
Channel Setting ('Auto Scan' or 'Download from
TV'), or 'Do not set'.
k Setting Auto Channel Setting
Line System
er Save English Auto Scan
P Download from TV
p Navigator p Navigator Do not Set
• Select Do not set if you want to skip channel setup
(because they have already been set up, for example).
• You can only use the Download from TV feature if
this recorder is connected to your TV using a fully-
wired 21-pin SCART cable via the AV1 (RGB)-TV
connector, and if your TV supports this function
(check your TV's instruction manual for more details).
ENTER
• Select your country.
k Setting k Setting Country Selection
t Line System Line System
er Save
er Save Country
P
• Auto-tuning channels
The Auto Scan option automatically scans and sets the
channel presets.
Tuning
Cancel
• Downloading channels from your TV
Use the Download from TV option to download all the
channels that your TV is tuned to.
Downloading
Cancel
ENTER
9 Select 'Auto' for automatic time setting,
or 'Manual' to set the clock manually.
If the clock was already set from a D.TV channel in step 6,
this step is skipped.
k Setting Clock Setting
Line System
er Save Auto Auto
P Manual
UK
32/99
Pr 5
32/99
• Auto clock setting
Some TV channels broadcast time signals together
with the programme. This recorder can use these
signals to set the clock automatically.
Set 'Clock Set CH' to the channel preset number
that broadcasts a time signal, then move the
cursor down to 'Start' and press ENTER.
k Setting Auto Clock Setting
Line System
Date
er Save
Time
P
p Navigator p Navigator
Clock Set CH
The recorder takes a short while to set the time. After
you see that it's set, select Next to proceed.
k Setting Auto Clock Setting
Line System
Date MON 0 1 / 0 1 / 2 0 0 7
er Save
Time
P
p Navigator p Navigator
Clock Set CH
If the time could not be set automatically, press
RETURN/EXIT to go back to the previous screen and
select Manual.
• Manual clock setting
If no stations in your area are broadcasting time
signals, you can set the clock manually.
Use the buttons to set your time zone.
You can set this by selecting a city or a time relative
to GMT.
k Setting Manual Clock Setting
Line System
Time Zone
er Save
P
p Navigator p Navigator Summer Time Of f
Press then use the
or 'Off' for summer time, then press ENTER.
Select On if you are currently using summer time.
k Setting Manual Clock Setting
Line System
Time Zone
er Save
P
p Navigator p Navigator Summer Time
– – / – – / – – – –
– – : – –
P r 1
St a r t
1 1 : 2 0
P r 1
St a r t
Ne xt
1/2
England
London
buttons to select 'On'
1/2
England
London
On
03
57
En