Other Connections; Connecting Auxiliary Components; Connecting An Analog Audio Component; Listening To An External Audio Source - Pioneer RCS-LX60D Operating Instructions Manual

Other connections

Chapter 9
Other connections
Important
• When connecting this system or changing
connections, be sure to switch power off and
disconnect the power cord from the wall socket.
After completing all connections, connect the power
cord to the wall socket.

Connecting auxiliary components

This system has optical-type digital inputs. Use these to
connect external components, such as your MD or CD
recorder.
AUDIO INPUT
DIGITAL
VR1 DVD/DVR2
AL) (OPTICAL)
MCACC
SETUP MIC CONTROL IN
SPEAKERS
SYSTEM CONNECTOR CONTROL
OUT SUBWOOFER R SURROUND
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
R
CENTER FRONT
AC IN
MD, CD Recorder, etc.
• Connect the DVD/DVR2 (OPTICAL) or DIGITAL
(OPTICAL) jack on the rear panel to the optical
output of an external playback component.
These include digital components such as an MD player,
digital satellite, or a game system.

Connecting an analog audio component

You can use the ANALOG input jacks to connect an
analog audio component, such as a tape player. See
Using this system for TV audio on page 14 for connection
details (this explains connecting the audio output from
your TV, but any analog audio component can be
connected).
DIGITAL
(OPTICAL)
ANTENNA
FM UNBAL 75 AM LOOP ANTENNA
AUDIO INPUT
DIGITAL
DVD/DVR1 DVD/DVR2 DIGITAL ANALOG
(COAXIAL) (OPTICAL) (OPTICAL)
L
L
R
L
To digital audio
output (optical)

Listening to an external audio source

You can connect both analog and digital external audio
sources to this system. Digital audio sources include
digital satellite receivers, CD recorders, etc. Analog
sources include your TV. See also Using this system for
TV audio on page 14 and Connecting auxiliary
components above.
RECORDER
HDD/DVD FM/AM
PAUSE
1 If the system isn't already on, press
to switch on.
Also make sure that the external source (TV, satellite
receiver, etc.) is switched on.
2 Use the AUDIO IN button to select an audio input
source.
DVD/DVR1
ANALOG
3 If necessary, start playback of the external
source.
RECEIVER RECEIVER
SOUND
AUDIO IN AUDIO IN
RETRIEVER
PLAY STOP
RECEIVER
DVD/DVR2
DIGITAL
9
33
En