Additional Information; Dimming The Display; Dts Cd Setting; Setting The Sleep Timer - Pioneer RCS-LX60D Operating Instructions Manual

10

Additional information

Chapter 10
Additional information
Important
• To access green functions on the remote, move the
slider switch from MAIN to SUB.

Dimming the display

You can choose to dim the display if you find it too bright.
1 Press SETUP.
2 Use the
press ENTER.
3 Use the
then press ENTER.

DTS CD setting

If you play a DTS-encoded CD, you will need to change
this setting to hear the decoded signal.
1 Switch the system into standby.
2 Press SETUP.
3 Use the
menu, then press ENTER.
4 Use the
press ENTER.
Select from:
• NORMAL – Use for playback of regular audio CDs.
Some DTS-encoded CDs will output noise when played.
Note
1 The display dims when the sleep timer is set, regardless of this setting.
2 The display dims when the sleep timer is set. The HDD/DVD recorder does not automatically switch off with the sleep timer.
36
En
+ +
SETUP SETUP / TUNE SR ONE TOUCH COPY
1 1 2 2 3
- +
/ ST ENTER ENTER / ST
PAUSE LIVE TV
4 4 5 5 6 6
-
F. S. SURR / TUNE TEST TONE VIDEO IN
7 8 8 9
SURROUND ADVANCED SOUND MENU
0
SLEEP CLEAR
JUKEBOX
INPUT CHANNEL VOLUME DISPLAY
RDS DISP
TEXT TV/DVD
TV CONTROL
MAIN MAIN SUB SUB
buttons to select DIMMER then
buttons to select LIGHT or DARK
buttons to select CD TYPE from the
buttons to select a setting, then
• DTS-CD – Use for playback of DTS-encoded CDs, but
note that the beginning of regular CD tracks may be
skipped.

Setting the sleep timer

SURROUND
SLEEP SLEEP
INPUT
MAIN MAIN
The sleep timer switches off the receiver subwoofer after
a specified time so you can fall asleep without worrying
2
about it.
1
1 Press the SLEEP button to select an option.
Choose between the following options:
• SLP ON – Switches off after about an hour
• SLP OFF – Cancels the sleep timer
After selecting SLP ON, you can press SLEEP again to
check how much time is left. Each line indicates
approximately 12 minutes (remaining):
S L P - - - - -

Resetting the system

Use this procedure to reset all system settings to the
factory default.
1 Switch the system on.
2 Press and hold SURROUND then press the
STANDBY/ON button on the display unit.
The next time you switch on, all the system settings
should be reset.
ADVANCED SOUND MENU
0
CLEAR
JUKEBOX
CHANNEL VOLUME DISPLAY
TEXT TV/DVD RDS DISP
TV CONTROL
SUB SUB