Pioneer RCS-LX60D Operating Instructions Manual page 141

The Initial Setup menu
Setting Options
Audio Out
Dolby Digital Out Dolby Digital •
Dolby Digital
PCM
DTS Out On •
Off
96 kHz PCM Out 96 kHz
96 kHz
MPEG Out MPEG
MPEG
Audio DRC On
Off •
Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to Dolby Digital. In this case adjust the
dynamic range from the receiver subwoofer — see Dynamic Range Control on page 32.
Language
OSD Language English •
available languages
On Screen Display and D.TV Language will both reflect this setting.
Audio Language English •
available languages
Other
Discs do not necessarily have audio in your selected language. Also, some discs override the Audio Language preference.
Subtitle Language English •
available languages
Other
Discs do not necessarily have subtitles in your selected menu language. Also, some discs override the Subtitle Language preference.
Explanation
Output a Dolby Digital signal when a Dolby Digital source is being played.
Convert Dolby Digital sources to Linear PCM output. Use if your connected
equipment doesn't have a Dolby Digital decoder.
Output a DTS signal when a DTS source is being played.
Switch off the digital output when a DTS source is being played. Use when
your connected equipment doesn't have a DTS decoder. In this case, use the
analog audio outputs.
48 kHz • Convert 96 kHz digital audio sources to 48 kHz output. Use if your connected
equipment doesn't support 96 kHz sampling rate.
Output 96 kHz digital audio when a 96 kHz source is being played.
Output an MPEG audio signal when a source using MPEG audio is being
played.
PCM • Convert sources with MPEG audio to Linear PCM output. Use if your
connected equipment doesn't have an MPEG audio decoder.
Switches on Audio DRC (Dynamic Range Control). Use when listening to
Dolby Digital material at low volume.
Switches off Audio DRC.
Sets the language of the on-screen displays to English.
Choose from the languages displayed for the on-screen displays.
Sets the default audio language for DVD-Video playback to English.
Choose from the languages displayed to set the default audio language for
DVD-Video playback.
Select to set the default audio language to something other than the ones
listed. See Selecting other languages for language options on page 147.
Sets the default subtitle language for DVD-Video playback to English.
Choose from the languages displayed to set the default subtitle language for
DVD-Video playback.
Select to set the default subtitle language to something other than the ones
listed. See Selecting other languages for language options on page 147.
15
141
En