Pioneer RCS-LX60D Operating Instructions Manual page 93

Playback
Playing CDs and WMA/MP3 discs
The table below shows the basic playback controls for
1
audio CDs , and WMA/MP3 files.
Press to start playback.
PLAY
Press to stop playback.
STOP
Pauses playback, or restarts playback
PAUSE
when paused.
Except WMA: Press to start scanning.
Press again to increase the scanning
speed. (There are two scan speeds; the
current scan speed is shown on-screen.)
Press to skip to previous/next track (or
PREV NEXT
folder for WMA/MP3 disc). (During
playback you can also use the front panel
CH +/– buttons.)
During playback, enter a track number
SETUP /TUNE+ SR+
1 2 3
then press ENTER to skip directly to that
/ST– ENTER /ST+
4 5 6
track.
F.S.SURR /TUNE– TEST TONE
7 8 9
Press CLEAR to clear a number entry and
ADVANCED SOUND
0
start again.
CLEAR
ENTER
Playing Video CD/Super VCDs
The table below shows the basic playback controls for
Video CD/Super VCDs.
Some discs feature Playback Control (PBC for short)
menus. These discs show PBC in the display when you
load them and display a menu on-screen from where you
2
can select what to watch.
Press to start playback.
PLAY
Video CD only: If RESUME is displayed on-
screen, playback starts from the place last
stopped.
Press to stop playback.
STOP
Video CD only: You can resume playback
from the same point by pressing
STOP again to cancel the
(Press
resume function.)
Note
1 If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with a digital connection. Noise
will be output through the analog outputs. Also make sure that STEREO is selected using the AUDIO button (see Switching audio channels
on page 99).
2 When playing in PBC mode, some playback features, such as search, repeat and programme play are not available. You can play a PBC Video
CD/Super VCD in non-PBC mode by starting playback using the Disc Navigator (see Using the Disc Navigator with playback-only discs on
page 95).
PAUSE
PREV NEXT
SETUP /TUNE+ SR+
1 2 3
/ST– ENTER /ST+
4 5 6
F.S.SURR /TUNE– TEST TONE
7 8 9
ADVANCED SOUND
0
CLEAR
ENTER
CM BACK
CM SKIP
/
RETURN / EXIT
PLAY.
Pauses playback, or restarts playback
when paused.
Press to start scanning. Press repeatedly
to increase the scanning speed.
Press to skip to previous/next track.
When a PBC menu is displayed, press to
display the previous/next page. (During
playback you can also use the front panel
CH +/– buttons.)
During playback, enter a track number
then press ENTER to skip directly to that
track.
Press CLEAR to clear a number entry and
start again.
While a PBC menu screen is displayed,
use to select numbered menu items.
Video CD in non-PBC mode only:
(Commercial back/skip)
Turn the Smart Jog counter-clockwise for
backward skip; turn clockwise for forward
skip. You can search up to two hours in
either direction.
While paused, press and hold to start
slow-motion playback. Press repeatedly to
change the playback speed (forward only).
While paused, press to advance a single
frame (forward only). You can also execute
frame-by-frame playback via the
Smart Jog.
Press to display the disc menu of a Video
CD/Super VCD playing in PBC mode.
07
93
En