The Disc Setup Menu; Basic Settings; Initialize Settings - Pioneer RCS-LX60D Operating Instructions Manual

13

The Disc Setup menu

Chapter 13
The Disc Setup menu
From the Disc Setup menu you can name discs, lock the
contents to prevent accidental recording and erasure,
initialize and finalize discs. The Disc Setup menu is
accessed from the Home menu.

Basic settings

Input Disc Name
DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM
When you initialize a disc for recording, the recorder
automatically assigns a name for the disc ranging from
DISC 1 to DISC 99. You can use the Input Disc Name
function to change the default disc name to something
more descriptive. This name appears when you load the
disc and when you display disc information on-screen.
1 Select 'Disc Setup' from the Home Menu.
HOME MENU
ENTER
2 Select 'Basic' > 'Input Disc Name' > 'Next
Screen'.
Disc Setup
Basic Basic
Initialize
Finalize
Optimize HDD
ENTER
3 Input a name for the disc.
The disc name can be up to 64 characters long for a VR
mode disc, or 40 for a Video mode discs and DVD+R/+RW.
• See Title Name on page 107 for more on navigating
the input screen.
Lock Disc
DVD (VR) DVD-RAM
• Default setting: Off
Locking the disc will prevent accidental recording,
editing or erasing of the disc.
Note
1 Once initialized for VR mode recording it is not possible to re-initialize the disc for Video mode recording. Also, once recorded in Video mode,
the disc cannot be re-initialized for VR mode recording.
132
En
Input Disc Name Input Disc Name Input Disc Name Next Screen
Lock Disc
DVD-RW Auto Init.
Important
• A locked disc can still be initialized (which will
completely erase the disc).
1 Select 'Disc Setup' from the Home Menu.
HOME MENU
ENTER
2 Select 'Basic' > 'Lock Disc' then 'On' or 'Off'.
Disc Setup
Basic Input Disc Name
Basic
Initialize Lock Disc Lock Disc
Finalize DVD-RW Auto Init.
Optimize HDD
Set to On to prevent accidental recording, editing or
erasing of the disc loaded. If you need to unlock the disc
to make edits, select Off.
DVD-RW Auto Initialize
DVD-RW
• Default setting: VR Mode
Initialization mode is automatically carried out when you
insert a blank DVD-RW. You must set the desired
initialization mode before inserting a disc.
See DVD-RW Auto Initialize on page 90 for detailed
instructions.

Initialize settings

DVD-R DVD-RW DVD+RW DVD-RAM
You can initialize a recordable DVD-R/-RW disc for either
VR mode or Video mode recording.
The first time you load a new DVD-RW disc, it will be
automatically initialized for recording according to the
DVD-RW Auto Init. setting in the Disc Setup menu (see
page 90).
New DVD-R discs are ready for Video mode recording
when you load them, but it is also possible to initialize
them for VR mode recording.
On
Off
1