Pioneer RCS-LX60D Operating Instructions Manual page 145

The Initial Setup menu
Setting Options
Remote Control Recorder 1–3
Mode (default: Recorder 1)
AV. Link This Recorder Only • Signals received through the AV input when the recorder is in standby are
Pass Through
When set to Pass Through, make sure to set Power Save (page 137) to Off.
DivX VOD Registration Code
Set Preview Quick Preview •
(HDD only)
Normal
CI Information Next Screen
Software Update Next Screen
Options 2
USB Restart USB Device If the connected USB device does not respond to the recorder, try using this
Confirm Printer
Pause Live TV TV's Tuner
Recorder's Tuner • Allows you to use Pause Live TV with this recorder's internal TV tuner.
See also Pause Live TV on page 84 for more information on this setting.
HDD Sleep Mode Proceed
Explanation
If you are using more than one recorder in the same room, set them to
different IDs. This setting sets the recorder ID; to change the remote
controller ID, press and hold RETURN/EXIT then press 1, 2 or 3 to set. The
remote will only control a recorder with the same ID.
not passed through to the AV output.
Signals received when in standby are passed though to the output for
connected devices. (Note that during EPG data download, the EPG data is
not passed through.)
Use to display the recorder's DivX registration code. See DivX video
compatibility and DivX® VOD content on page 46.
When in the Disc Navigator, the thumbnail video plays short excerpts from
throughout the selected title. (Note that edited titles that will play normally
from the beginning.)
The thumbnail video plays from the beginning of the title.
This option displays a menu of CI card functions. Consult your service
provider for more information on the functions available.
The Software Update function can check for and download updated system
software for the digital tuner. See Using Software Update (Digital tuner) on
page 147.
option to restart it. If the device still does not work properly try switching it off
then back on, and/or disconnecting then reconnecting the USB cable.
Use this option to confirm the make and model of the printer connected to
the recorder (does not work with all printers).
Allows you to use the Pause Live TV feature with an AV Link-compatible TV
connected by SCART cable.
Puts the HDD to sleep. Using this feature when playing DVDs or CDs allows
you to reduce noise produced by the unit, resulting in improved sound
quality. When you wake the HDD back up it will take a few seconds to load.
The HDD can be taken out of Sleep Mode by any number of actions,
including:
• Turning the power off and on again.
• Pressing the HDD/DVD button and choosing the HDD.
• When a timer recording begins.
• When you try and make any changes to system settings.
15
145
En