For Users Receiving Digital Broadcast Services - Pioneer RCS-LX60D Operating Instructions Manual

03 Getting started
Set the date (day/month/year) and time, then
press ENTER to make all the settings.
k Setting Manual Clock Setting
Line System
Date
er Save
P
Time
p Navigator p Navigator
Time Zone
Summer Time
• Use the
highlighted field.
• Use the
another.
• You can go back to the previous screen in the Setup
Navigator by pressing RETURN/EXIT.
ENTER
10 Select the EPG (Electronic Programme
Guide) type to use.
• GUIDE Plus+: Use the Gemstar GUIDE Plus+ EPG
(see also Setting up the GUIDE Plus+® system on
page 59 and Using the GUIDE Plus+® electronic
programme guide on page 62).
• Digital EPG: Use the SI EPG (programme information
broadcast together with digital channels).
• If no channels were found when scanning for digital
TV channels then this screen does not appear and
the EPG is set according to the country set in step 7
above.
ENTER
11 Select the TV screen type, 'Wide (16:9)'
or 'Standard (4:3)'.
k Setting TV Screen Size
Line System
er Save
P
p Navigator p Navigator
ENTER
12 Select whether or not your TV is
compatible with progressive scan video.
k Setting Progressive
Line System
er Save
P
p Navigator p Navigator
• This screen is not displayed when an HDMI signal is
being output.
58
En
2/2
MON 01 / 01 / 2007
00 : 00
England
London
O n
buttons to change the value in the
buttons to move from one field to
Wide (16:9)
Standard (4:3)
Compatible
Not Compatible Not Compatible
Don't Know
13 Press to continue after reading the HDD
ENTER
caution.
k Setting In the event of HDD failure, recordings may
be lost or normal playback/recording may
Line System
not be possible.
er Save
As recordings might be lost in case of a HDD
P
failure, we recommend to use the HDD only
as temporary storage media.
p Navigator p Navigator
Please copy recordings you want to keep
to recordable DVD.
Press ENTER to continue.
ENTER
14 Select 'Finish Setup' to exit the Setup
Navigator, or 'Go Back' if you want to start again.
k Setting
Se t u p i s co m p le t e!
Line System
er Save
F in is h S et u p Fi n is h Se t u p
p Navigator p Navigator Go B ac k
That completes basic setup using the Setup Navigator.
• If there are blank channels with no station, you can
set these to skip using the manual channel setting.
See Manual CH Setting on page 139.
For users receiving digital broadcast
services
This unit can set its internal clock automatically from
digital broadcasts. However, depending on the
broadcaster, the clock information received may not be
accurate.
Use the following procedure (while the recorder is not
recording) to set the clock manually.
1 Press HOME MENU.
HOME MENU
ENTER
2 Select 'Initial Setup' > 'Basic' > 'Clock
Setting'.
3 Highlight the time setting.
4 Press to display the manual clock setting
ENTER
screen.
5 Set the correct time.
Return to automatic clock setting
• To return to the automatic clock setting, follow the
instructions for 'Replace Channels' (page 137).