DVR645H_WY_EN.book 16 ページ 2006年7月5日 水曜日 午前10時25分
02
Connecting up
Easy connections
The setup described below is a basic setup that allows you to watch and record TV programs,
and play discs. Other types of connections are explained starting on the following page.
Important
• These connections use SCART cables (not supplied). If your TV (or VCR) does not have a
SCART connection, if you want to use the supplied audio/video cable, see Using the
supplied audio/video cable on page 17.
• The AV1(RGB)-TV AV connector can output ordinary (composite), S-video or RGB video,
plus stereo analog audio. The AV2(INPUT 1/DECODER) connector accepts ordinary, S-
video and RGB video input, as well as stereo analog audio. See AV1 Out and AV2/L1 In on
page 135 for how to set them up.
• Before making or changing any rear panel connections, make sure that all components
are switched off and unplugged from the wall outlet.
SCART AV
CONNECTOR
4
TV
AC IN
AV 1 (RGB) – TV
DIGITAL
CONTROL
OUT
COAXIAL
IN
G-LINK
5
SCART AV
CONNECTOR
VCR
1
Connect the cable from the antenna/
cable TV outlet to the antenna input on
your VCR.
• If you are not connecting a VCR in the
chain, connect it to the ANTENNA IN
(RF IN) jack on this recorder and skip the
next step.
16
En
ANTENNA
IN
3
ANTENNA
IN (RF IN)
Y
IN
HDMI OUT
P
AV 2 (INPUT 1/DECODER)
B
OUTPUT
R
L
R
L
OUT
P
R
COMPONENT
AUDIO
VIDEO
AUDIO
VIDEO
ANTENNA
S-VIDEO
S-VIDEO
VIDEO OUT
INPUT3
ANTENNA
OUT
2
ANTENNA
OUT
ANTENNA
IN
1
Antenna/cable TV
wall outlet
2
Use an RF antenna cable (one is
supplied) to connect the antenna output
of your VCR to the ANTENNA IN (RF IN) of
this recorder.
3
Use another RF antenna cable to
connect the ANTENNA OUT of this
recorder to the antenna input on your
TV.
4
Use a SCART cable (not supplied) to
connect the AV1(RGB)-TV AV connector
on this recorder to the SCART AV
connector on your TV.
5
Use another SCART cable to connect
the AV2(INPUT 1/DECODER) AV
connector to a SCART AV connector on
your VCR.
Tip
• This recorder has a 'through' function
which allows you to record a TV program
from the built-in TV tuner in this recorder
while watching a video playing on your
VCR (To use this feature when the
recorder is in standby, Power Save
must be set to Off —see Power Save on
page 132).