Switching Audio Channels; Switching Camera Angles; Displaying Disc Information On-Screen - Pioneer RCS-LX60D Operating Instructions Manual

Playback

Switching audio channels

DVD (VR) DVD-RAM HDD CD
1
For HDD and VR mode content recorded with bilingual
audio, you can switch between left (L) channel, right (R)
2
channel, or both (L+R).
When playing Video CDs and audio CDs you can switch
between stereo, just the left channel or just the right
channel.
Some Super VCDs have two soundtracks. With these
discs you can switch between the two soundtracks as
well as individual channels in each.
AUDIO
+
• Press repeatedly to display/switch the
MAIN SUB
audio channel.
The audio channel(s) currently playing are indicated on-
screen.
HDD DVD (VR) DVD-RAM
L+R – Both channels (default)
L – Left channel only
R – Right channel only
Video CD WMA/MP3
CD
Stereo – Stereo (default)
1/L – Left channel only
2/R – Right channel only
Super VCD
1 Stereo – Soundtrack 1/Stereo (default)
1 L – Soundtrack 1/Left channel
1 R – Soundtrack 1/Right channel
2 Stereo – Soundtrack 2/Stereo
2 L – Soundtrack 2/Left channel
2 R – Soundtrack 2/Right channel
Note
1 Only when HDD Recording Format is set to Video Mode Off (HDD Recording Format on page 143).
2 • When playing a Bilingual recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via the digital output, you cannot
switch the audio channel. Set Dolby Digital Out to Dolby Digital
if you need to switch the audio channel.
• When playing a Dolby Digital source, you can also switch channels from the Dual Mono menu of the receiver subwoofer — see Dual mono
setting on page 32.
Video CD Super VCD WMA/MP3

Switching camera angles

DVD-Video
Some DVD-Video discs feature scenes shot from two or
more angles — check the disc box for details: it should
be marked with a icon if it contains multi-angle
scenes. When a multi-angle scene is playing, the same
icon appears on screen to let you know that other angles
are available (this can be switched off if you prefer — see
Angle Indicator on page 143).
ANGLE
+
• Switch the camera angle.
MAIN SUB
• The angle number is displayed on-screen.
• If the disc was paused, playback starts again with the
new angle.

Displaying disc information on-screen

You can display various on-screen information about the
disc loaded or the HDD.
DISPLAY
• Display/change the on-screen information.
• Press once to show the HDD and removable disc
(DVD, etc.) activity together. Press again to show the
status of just the currently selected playback/
recording device (HDD or removable disc).
• To hide the information display, press DISPLAY
repeatedly until it disappears.
HDD and removable disc activity display
Press DISPLAY once to see the HDD and removable disc
(DVD, etc.) activity. Use the HDD/DVD button to switch
between the two kinds of display.
PCM (see Dolby Digital Out on page 141) or listen via the analog outputs
07
99
En