On-Screen Displays - Pioneer RCS-LX60D Operating Instructions Manual

16 Additional information

On-screen displays

The table below shows a list of error messages that you may encounter when using the recorder and an explanation
of their meaning.
Message
• Initializing disc. Please wait a moment.
• Incompatible region number.
• Cannot record any more titles.
• No more space for file management data.
• This disc cannot be recorded. Undo the
finalization.
• Cannot play this disc.
• This disc cannot be recorded.
• Cannot read the CPRM information.
• Could not record the information to the disc.
• Cannot edit.
• Could not initialize disc.
• Could not complete finalization successfully.
• Could not undo finalization successfully.
• Could not successfully unlock the disc.
• Incompatible or unreadable disc.
• Cannot record to a disc that is not CPRM
compatible.
• Cannot record this content using Video
mode recording.
• This video cannot be recorded to DVD+R/+RW.
• This content is copy protected.
• Incorrect CPRM information.
• Repairing disc.
• Repairing the HDD.
• Could not repair the disc.
• Overheating has stopped operation. Press
DISPLAY to clear message.
• HDD optimization is recommended. This can
be done using Disc Setup.
• Please perform HDD optimization. This can
be done using Disc Setup.
156
En
Explanation/Action
When you load a blank DVD-RW or DVD+RW disc, the recorder
automatically initializes it.
The disc loaded has an incompatible region number for the recorder
and so will not play.
The disc control data limit has been reached, or the maximum
number of chapters and/or titles has been reached. Erase titles/
chapters or combine chapters.
The disc was finalized on a non-Pioneer DVD recorder. Undo the
finalization in order to recording/editing.
The disc may be dirty or damaged. Take out the disc, clean it and
retry. If the error persists, use a new disc. If the error appears even
with a new disc, please ask your nearest Pioneer-authorized service
center or your dealer to carry out repairs.
The disc loaded is a playback-only disc type. This display may also
appear if the disc is dirty or damaged.
The video source is copy-once protected. Use a VR mode DVD-R/-RW
disc with CPRM for recording.
The video source is copy-protected and cannot be recorded.
The recorder could not read the CPRM information. The recorder
may be damaged — please ask your nearest Pioneer-authorized
service center or your dealer to carry out repairs.
During recording, the power was cut. This display appears when the
power is restored.
The recorder was unable to repair the disc after a power cut. The
contents of the recording will be lost.
The internal temperature of the recorder has exceeded the operating
limit. If this message reappears, please ask your nearest Pioneer-
authorized service center or your dealer to carry out repairs.
The HDD should be optimized (basically, HDD housekeeping) to
maintain playback and recording performance.
The HDD is in more urgent need of optimization in order to maintain
performance.