These footnote tables show the actual ranges of all data areas. Bit numbers are provided (except for DM and TC areas); remove the rightmost two digits for word numbers.

00000 to 23515 23600 to 25507

HR 0000 to 9915

306

Symbol

Shifts all data, between the starting word

(St) and ending word (E), one digit (four

bits) to the left, writing zero into the right-

SLD(74)

most digit of the starting word. St and E

must be in the same data area.

Shifts all data, between starting word (St)

and ending word (E), one digit (four bits) to

the right, writing zero into the leftmost digit

SRD(75)

of the ending word. St and E must be in the

same data area.

Converts up to four hexadecimal digits in

the source word (S), into decimal values

MLPX(76)

from 0 to 15, and turns ON the correspond-

ing bit(s) in the result word(s) (R). There is

one result word for each converted digit.

Digits to be converted are designated by

Di. (The rightmost digit specifies the first

digit. The next digit to the left gives the

number of digits to be converted minus 1.

The two leftmost digits are not used.)

Determines the position of the leftmost ON

bit in the source word(s) (starting word: S)

DMPX(77)

and turns ON the corresponding bit(s) in

the specified digit of the result word (R).

One digit is used for each source word.

Digits to receive the converted values are

designated by Di. (The rightmost digit

specifies the first digit. The next digit to left

gives the number of words to be converted

minus 1. The two leftmost digits are not

used.)

TR 0 to 7

AR 0000 to 2715

Function

St + 1

E – 1

LR 0000 to 6315

TC 000 to 511

Appendix B

Operand Data Areas

St/E:

Di:

0 to F

Read/Wr: DM 0000 to DM 0999

0000 to 9999

Rd only: DM 1000 to DM 1999

or 0000 to FFFF

Di:

Table of Contents

Chapters

Table of Contents

Omron C200H Operation Manual page 314

Chapters

Related Manuals for Omron C200H

Related Products for Omron C200H

Table of Contents