Omron C200H Operation Manual page 266

Program Backup and Restore Operations
Key Sequence
**These times take the cassette leader tape into consideration according to the following:
a) When recording to tape, the leader tape needs to be allowed to pass before the data transmission to the tape player starts.
b) When restoring from tape or comparing data, the Programming Console needs to be ready to receive data before the data is transfered
from the tape.
A
0
EXT
CLR
[Stop address]
WRITE
[Start address]
[File no.]
WRITE
Start recording with the
tape recorder.
After about 5 seconds**
(Cancel with the CLR key).
Section 7-2
REC
SHIFT
RESET
255