Omron C200H Operation Manual page 23

LSS Capabilities
Group
DM (data memory) DM operations are used to edit DM data in hexadecimal or ASCII form. There are also features
for copying, filling and printing DM data, as well as data disk save and retrieve operations.
I/O TABLE I/O TABLE is used to edit, check, and print I/O tables. It also provides data disk save and re-
trieve operations.
UTILITY DATA AREA LISTS
CHANGE ADDRESSES
PRINT LISTS
EPROM FUNCTIONS
C500
NETWORK DATA LINKS Creates a data link table.
CREATE LIBRARY FILE
TIME CHART MONITOR
UTILITY (contin- SET INSTRUCTIONS
ued) )
RETRIEVE/SAVE INSTR
PC SETUP
1-8-2 Online Operations
Group Function name
ON-LINE MONITOR DATA
TRANSFER PROGRAM
ON-LINE EDIT
READ CYCLE TIME
CLEAR DATA AREAS
MEMORY USAGE
Operations are also available to change display modes and search for instructions and comments.
DM DM area operations are available to transfer and compare DM data between the PC, LSS, and data
disks, and to monitor DM contents in the PC.
I/O TABLE I/O TABLE operations are used to write, transfer, and compare I/O tables between the PC and LSS.
UTILITY FILE MEMORY
XFER DATA LINK TBL
CLOCK
TRANSFER INSTR
TRANSFER PC SETUP
Displays lists of such items as used areas and cross-references
(i.e., instructions that use specified operands).
Globally changes bit and word addresses in the user program.
Prints lists, ladder diagrams, and mnemonics.
Writes, reads, and compares the user program between the PROM
Writer and system work disk.
→
Converts the program format from C500 to C2000H
C2000H
Formats a floppy disk or hard disk for use with the LSS.
Accesses the time chart monitor displays produced online.
Used to assign instructions to function codes in instructions tables
and to save/retrieve instructions tables to/from data disk files.
Used to save and retrieve expansion instruction sets to and from
data disk files.
Used to set the PC operating parameters in the PC Setup and to
save and retrieve PC Setups to and from data disk files.
Used to monitor up to 20 bits/words during program execution. The status
of bits and contents of words being monitored can also be controlled.
Transfers and compares the user program between the LSS and PC.
Edits the PC program during MONITOR mode execution.
Reads and displays the cycle time of the PC.
Clears the PC data areas such as HR, CNT, AR, and DM (to zero).
Displays the used capacity of program memory area, comments, and
internal memory.
Displays file memory lists; transfers file memory contents between PC
and LSS; clears file memory; transfers file memory contents between PC
and File Memory Unit; saves or retrieves file memory contents to or from
floppy disk; and edits file memory data.
Transfers and compares data link tables between the PC and computer.
Used to read and set the internal clock in the PC.
Used to transfer the expansion instruction set from the PC to the LSS.
Used to transfer the PC Setup between the PC and the LSS
Description
Description
Section 1-8
9