Appendix 5 How To Use Melsec-Q Series Modules; Window Change Between Gx Works2 And Gx Works3 - Mitsubishi Electric MELSEC iQ-R Series Configuration Manual

Appendix 5
This section describes how to use MELSEC-Q series modules.
• For the MELSEC-Q series modules which can be used, refer to the following.
Page 47 MELSEC-Q series
• For precautions when using each module, refer to the following.
Page 166 Precautions
• When using module dedicated instructions, create programs by referring to the manual for each module.
• When using the C Controller module, refer to the following.
 MELSEC iQ-R C Controller Module User's Manual (Startup)

Window change between GX Works2 and GX Works3

Windows in GX Works2 for the MELSEC-Q series changes the following windows in GX Works3.
Parameter items
This section describes the window change of parameters. For parameter setting method on GX Works3, refer to the following.
 MELSEC iQ-R CPU Module User's Manual (Application)
■ I/O assignment setting
• "Points", "Start XY", and "PLC Operation Mode at H/W Error" in "I/O Assignment" of GX Works2 change the following
window in GX Works3.
GX Works2
[Project window]  [Parameter]  [PLC
Parameter]  [I/O Assignment]
APPX
158

Appendix 5 How to Use MELSEC-Q Series Modules

How to Use MELSEC-Q Series Modules
GX Works3
[Navigation window]  [Parameter]  [System Parameter]  [I/O
Assignment Setting]