Appendix 2 How To Use Melsec-Q Series Modules; Window Change In Cw Configurator - Mitsubishi Electric MELSEC iQ-R Series User Manual

Appendix 2
This section explains how to use MELSEC-Q series modules.

Window change in CW Configurator

Setting items in Setting/monitoring tools for the C Controller module used for MELSEC-Q series are changed to the following
windows in CW Configurator.
Parameter items
For parameter setting method on CW Configurator, refer to the following manual.
MELSEC iQ-R C Controller Module User's Manual (Application)
■"Points", "Start XY", and "PLC Operation Mode at H/W Error" in "I/O assignment settings"
Setting/monitoring tools for the C Controller module
[Navigation window]  [CCPU Parameter]  [I/O
assignment settings] tab
[Navigation window]  [CCPU Parameter]  [I/O
assignment settings] tab  [Detailed Setting] button
APPX
102

Appendix 2 How to Use MELSEC-Q Series Modules

How to Use MELSEC-Q Series Modules
CW Configurator
[Navigation window]  [Parameter]  [System
Parameter]  [I/O Assignment Setting] tab