Mitsubishi Electric MELSEC iQ-R Series Configuration Manual page 74

• I/O numbers in the actual system
CPU
• To set the module reserved for future use, or when an already set module is not to be mounted, perform the module status
setting. ( Page 74 Module status setting)
2 ASSIGNMENT FOR MODULES
72
2.2 I/O Numbers of Modules
0 1 2 3 4
16 16 16 16 16
00 10 20 40 30
to to to to to
0F 1F 2F 4F 3F
5 6 7 8 9 10
16
40
to
4F
Number of points
I/O number
11 12
I/O numbers of the module on slot No.5, which is not
set in the engineering tool, are assigned following the
I/O numbers of the module on slot No.4. This results
in an overlap of I/O numbers.
Set the I/O numbers of the module on slot No.5 in the
parameter so that they do not overlap.