Utility mode
12.7
Header/Footer Settings
Follow the procedures described below to specify headers/footers used with the Stamp/Composition
functions available from the Application tab.
12.7.1
Specifying headers/footers
1
Display the Administrator Settings screen.
–
For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 12-42.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [Forward
The Stamp Settings screen appears.
4
Touch [1 Header/Footer Settings].
The Header/Footer Settings screen appears.
5
Touch [New].
The Header/Footer Settings > New screen appears.
bizhub 501/421/361 (Version 2)
], and then touch [2 Stamp Settings].
12
12-53