Konica Minolta BIZHUB 501 Copy Operations page 499

Utility mode
15
To specify the maximum number of prints allowed, use the keypad to type in the desired value.
– To specify no maximum for prints, touch [No Limit].
16
Touch [OK].
The maximum number of prints allowed is set.
17
To use authentication unit (biometric type) or authentication unit (IC card type), touch [Register Auth.
Info.].
– [Register Auth. Info.] appears only if an authentication unit is installed on this machine.
– For details on using the authentication unit, refer to the user manual for the authentication unit.
The Register Auth. Info. screen appears.
18
Touch [Edit].
– When using authentication unit (biometric type), place a finger on the authentication unit and
register the vein patterns.
– When using authentication unit (IC card type), place an IC card on the authentication unit and
register the card information.
19
Touch [Function Permission].
The Function Permission screen appears.
20
Touch the button for the desired setting for each operation.
– To permit the operation to be performed, touch [Allow].
– To prohibit the operation to be performed, touch [Restrict].
– Touch [All Users] to apply the settings in the current screen to all registered users. Touch [All Users],
touch [OK], and then touch [OK] in the next screen that appears.
bizhub 501/421/361 (Version 2)
12
12-67