Header/Footer Settings] - Konica Minolta bizhub36 Users Manual Network Administration

4.18 [Fax Settings]
4.18.2

[Header/Footer Settings]

Specify the position on a page where sender information and fax ID that are printed on received documents.
%
Press the Utility/Counter key ö [Admin Settings] ö [Fax Settings] ö [Header/Footer Settings].
Settings
[Header Position]
[Fax TX Header Name]
[Footer Position]
Factory default
[Header Position]
[Fax TX Header Name]
[Footer Position]
The following indicates where to print sender information or reception information.
- [Inside Body Text]: The sender or receiving information is added so that it is overlaid on part of the orig-
inal image before the fax is being sent.
bizhub 42/36
Specify the position of the sender information to be added on a fax docu-
ment sent from this machine. The added sender information is printed as a
part of the image on the document received by the recipient. If you select
[OFF], the sender information will not be added. (Not displayed for North
American or Hong Kong models.)
Specify the items to be added as the sender information.
Specify the position of the reception information (reception time and re-
ception number) to be printed on a document received by this machine. If
you select [RX Ft. OFF], the reception information will not be printed.
[Outside Body Text]
[ON]
[RX Ft. OFF]
FROM:MFP01 TO:123456789 2011/04/25 13:22:11 #138 P.001/001
4
4-47