Konica Minolta BIZHUB 501 Copy Operations page 342

8
4
Touch [<->] to switch between the integer and the fraction, and then touch [–] and [+] to specify the
width to be erased.
– When using the keypad to specify the settings, press the [C] (clear) key, and then specify the setting.
– To cancel the setting and select the default, press the [Reset] key.
– To cancel the "Center Erase" function, touch [No].
What happens when a value outside of the allowable range is specified?
?
% The massage "Input error" appears. If "Input error" appears or if the erased width was incorrectly
entered, press the [C] (clear) key in the keypad, and then specify the correct value.
5
Touch [OK].
6
Specify any other desired copy settings.
7
Using the keypad, type in the desired number of copies.
8
Press the [Start] key.
8-50
Application functions
bizhub 501/421/361 (Version 2)