Konica Minolta BIZHUB 501 Copy Operations page 75

Before making copies
3
Load the paper into the right side of the tray 3 so that the side of the paper to be printed on (the side
facing up when the package was unwrapped) faces up.
– To print on OHP transparencies, thick paper, thin paper, tracing paper or envelopes, use the bypass
tray.
– Load letterhead paper so that the side to be printed on faces down.
– If letterhead paper is loaded as shown below to make a single-sided copy, the document image is
printed on the side that was previously printed on. The paper will be fed out facing down.
? How is curled paper loaded?
% Flatten the paper before loading it.
bizhub 501/421/361 (Version 2)
2
2-53