Konica Minolta BIZHUB 501 Copy Operations page 82

2
Before loading envelopes, press them down to make sure that all air is removed, and make sure that
the folds of the flaps are firmly pressed, otherwise the envelopes may become wrinkled or a paper
misfeed may occur.
When loading envelopes, load them with the flap side up, as shown in the illustration. If the envelopes
are loaded with the flap side down, a paper misfeed may occur. The flap side of envelopes cannot be
printed on.
A maximum of 10 envelopes can be loaded into the bypass tray.
For setting orientation of label sheets, please consult your service representative.
Load label sheets one sheet at a time.
Be sure to load letterhead paper so that the side to be printed on faces up, and select [Letterhead] for
the paper type of the bypass tray.
2-60
Flap side
Before making copies
bizhub 501/421/361 (Version 2)