Konica Minolta BIZHUB 501 Copy Operations page 522

13
Registering from Data Administrator
In order to use Data Administrator, settings must be specified on the multifunctional product and the setup
procedure must be performed. The setup procedure includes installing this device's BioDriver (USB-Driver),
then installing Data Administrator Bio Plugin.
Reminder
Data Administrator ver. 4.0 or later must first be installed on the computer. For details on the operating
environment and installation procedure for Data Administrator, refer to the user manual for the Data
Administrator.
Checking the currently installed version
1
From the "Help" menu of Data Administrator, click "Version Information".
– If the version appears as "3.x": This software cannot be used. Install version 4.x.
– If Data Administrator ver. 3.x is installed, it is removed when version 4.x is installed.
2
Click the [Plug-in version] button.
3
From the "Plug-in information list", check the version of the Data Administrator plug-in.
– If the plug-in version appears as "4.x": This software can be used.
13-12
Authentication unit (Biometric type AU-101)
bizhub 501/421/361 (Version 2)