Multifunctional Product Settings - Konica Minolta BIZHUB 501 Copy Operations

14
14.4 Using Authentication unit (IC card type) AU-201
In order to use this device, user IC card IDs must first be registered with the machine.
A registered user can log on to a multifunctional product or print a print job after completing authentication
with their IC card IDs.
The following procedures describe how to specify the necessary settings on the multifunctional product,
register users, and perform the logon and print job operations after completing authentication.
Note
For details on positioning the IC card on this device, refer to the Quick Guide Authentication unit (IC
Card Type AU-201).
Reminder
Do not disconnect the USB cable while this device is being used, otherwise the system may become
unstable.
Do not store the IC card within 40 mm of the card scanning area.
14.4.1

Multifunctional product settings

!
Detail
User authentication on the multifunctional product must be set for machine authentication.
1
From the control panel of the multifunctional product, touch [User Authentication/Account Track] on the
Administrator Settings screen, and then touch [General Settings].
2
Set "User Authentication" to "ON (MFP)", and then touch [OK].
– For details on specifying settings for "Public User Access" and "Account Track", refer to the User
manual – Copy Operations included with the multifunctional product.
– External server authentication is not supported.
– When combined with account track settings, set "Synchronize User Authentication & Account
Track" to "Synchronize". If "Do Not Synchronize" is selected, the ID & Print function cannot be used.
14-6
Authentication unit (IC Card Type AU-201)
bizhub 501/421/361 (Version 2)