Konica Minolta BIZHUB 501 Copy Operations page 350

8
– If a decimal value is displayed in the screen, press the [C] (clear) key, and then use the keypad to
type in the adjustment amount. For details on switching between decimal and fraction values, refer
to "System Settings" on page 12-18.
– If a decimal value is displayed in the screen and the specified value is outside the allowable range,
the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key
to erase the value, and then specify the correct value.
? What are the limits on the adjustment amount?
% The print position can be finely adjusted in 0.1 mm increments.
Can no adjustment be made?
?
% To make no left/right or up/down adjustments, touch [No Adjustment].
8
If necessary, specify the other settings.
– To also specify settings for the "Cover Sheet", "Insert Sheet" and "Chapters" Application functions,
touch [Insert Sheet Setting], and then select the settings for the pages to be printed.
– Blank pages inserted using the "Cover Sheet", "Insert Sheet" and "Chapters" functions are only
counted, but page numbers are not printed on them.
– If "Print on Back Cover Only" or "Do Not Print Page Number" is selected under "Cover Sheet", page
numbers are printed starting with "2" in single-sided copies and starting with "3" in double-sided
copies.
– If "Do Not Print #" is selected, inserted pages are only counted, but page numbers are not printed
on them. If "Skip the Page(s)" is selected, inserted pages are not counted and page numbers are
not printed on them.
8-58
Application functions
bizhub 501/421/361 (Version 2)