Authentication unit (Biometric type AU-101)
Setup
1
Turn off the multifunctional product with the main power switch, and then disconnect this device from
the multifunctional product.
2
Install BioDriver (USB-Driver).
–
Plug the cable from this device into the USB port on the computer.
–
The Found New Hardware Wizard starts.
3
Select "Yes, now and every time I connect a device", and then click [Next].
4
Insert the application DVD included with this device into the DVD drive of the computer.
5
Select "Install from a list or specific location (Advanced)", and then click [Next].
bizhub 501/421/361 (Version 2)
13
13-13