9
5
Remove the empty staple cartridge.
–
Push the two PUSH buttons of the staple holder to slide
the top cover upward, then remove the empty staple
cartridge.
6
Install the new staple cartridge into the staple cartridge.
–
Push the staple cartridge, and then check that the
cartridge is securely installed.
7
Push down the top cover to return it to its original position.
8
Remove the lock tape from the cartridge.
9
Return the staple holder to the stapler, and push it down until
it clicks in place.
9-12
Replacing toner cartridges and staple cartridges and emptying punch scrap box
bizhub 501/421/361 (Version 2)