Konica Minolta BIZHUB 501 Copy Operations page 596

15
G
Group (Copy/Finishing)
Select this setting to separate the copies of each page in the original. The specified number of copies of the
second page is printed after all copies of the first page are finished.
Group (reference permission)
Use this feature to limit the addresses that each user can reference and to manage security.
I
Insert Image
Set this function to later scan multiple images from the original glass and insert them at the desired locations
in an original scanned with the ADF, then feed out all copies together.
Insert Sheet
Set this function to insert paper from the specified paper tray into the copies as chapter title pages.
M
Margin
Select the setting for the position of the binding margin for the loaded original. Selecting the appropriate
setting prevents the copy from being printed upside-down when making double-sided copies from single-
sided original or when making single-sided copies from double-sided originals.
Minimal
Select this setting to produce a copy with the original image slightly reduced.
Mixed Original
Select this setting to detect the size of each original page and print a copy on paper of the appropriate size
when an original with different page sizes is loaded together into the ADF.
N
Neg-/Pos. Reverse
Set this function to copy the original with the light- and dark-colored areas or the colors (gradations) of the
image inversed.
O
Offset
Select this setting to separate copies that are fed out.
OHP Interleave
Set this function to insert paper between OHP that are being copied.This prevents OHP from sticking
together.
Original Type
Select the setting for the image type of the original to better adjust the copy quality.
Original Direction
Select the setting for the orientation that the original is placed on the original glass or loaded into the ADF.
P
Paper
Select settings for the type and size of paper to be printed on.
Preview
Print image can be checked as a preview image before printing.
Proof Copy
Press this key to print a single sample copy and stop the machine so that it can be checked before printing
a large number of copies. This prevents copy errors from occurring in a large number of copies.
Punch
Select the setting to punch holes in the copies for filing.
S
Save in User Box
Temporarily saves the job on the hard disk so that it can later be recalled and used again
Separate Scan
Scans an original exceeding the maximum 80 pages that can be loaded into the ADF by scanning the original
in separate batches. The original can be scanned and treated as a single copy job. In addition, the scanning
location can be switched between the original glass and the ADF during the scanning operation.
15-8
Appendix
bizhub 501/421/361 (Version 2)