Table 2-53 Spp Configuration Parameters - Honeywell UMC800 Reference Manual

Function Blocks
2.60 SPP Function Block,
Configuration Parameters, continued
Block Properties
Double click on the function block to access the
function block properties dialog box.
Block Order (Read Only)
You can change the assigned execution order
number by selecting "Execution Order" in the
"Configure" menu and arrange the order to suit
your control strategy.
Configuration Parameters
You must configure the SPP function Block
parameters to the desired value or selection that
matches your operating requirements.
Table 2-53 describes the parameters and the
value or selection.
Properties Group
Block
Display Decimal
Places
SP Units
Aux Decimal
Places
Failsafe SP Failsafe
Setpoint
184
continued

Table 2-53 SPP Configuration Parameters

Parameter Index#
N/A
Tag Name
N/A
Descriptor
N/A
N/A
N/A
0
Function Block Reference Guide
Parameter Description
8 character tag name
Block descriptor
Number of places to display
after the decimal point
Engineering unit descriptor
Number of places to display
after the decimal point
Failsafe Setpoint Value
Value or Selection
0 - 5
4 Characters
4 Characters
-9999 to 9999
Engineering Units
3/99