Table 2-61 Tuning Tab Configuration Parameters - Honeywell UMC800 Reference Manual

Function Blocks
2.74 TPSC (3POS) Function Block,
Configuration Parameters, continued
TUNING TAB
It looks like this graphically on the Control Builder. Table 2-61 describes the parameters and the value or
selection.
Properties Group Parameter
Tuning Prop Band
Constants
222

Table 2-61 Tuning Tab Configuration Parameters

Index#
0 Proportional Band (PB) - is the
PB1 or percentage of the range of the
Gain1 measured variable for which a
proportional controller will
produce a 100% change in its
output.
or
29
PB2 or
Gain - is the ratio of output
Gain
Gain2
change(%) over the measured
variable change (%) that caused
it.
G = 100%
where PB is the proportional
Band (in %)
Function Block Reference Guide
continued
Parameter Description
PB%
Value or Selection
0.1 to 1000
0.1% to 1000%
ATTENTION: Enter
values for tuning
set 1 and tuning set
2 in specified fields.
continued next page
3/99