Rsw Function Block - Honeywell UMC800 Reference Manual

2.56 RSW Function Block

Description
The RSW label stands for Rotary Switch. This block is part of the Signal Selectors category. It looks like
this graphically on the Control Builder.
Function
The single output value is selected from up to 8 analog inputs by a number of from 1 to 8.
Note: Numbers less than one select input one as the output.
Numbers greater than eight select Input 8 as the output.
Input
IN1 = Input 1
IN2 = Input 2
IN3 = Input 3
IN4 = Input 4
IN5 = Input 5
IN6 = Input 6
IN7 = Input 7
IN8 = Input 8
SEL = Selects Input # to Output
Output
OUT = Output Value
Block Properties
Double click on the function block to access the function block properties dialog box.
Block Order (Read Only)
You can change the assigned execution order number by selecting "Execution Order" in the "Configure"
menu and arrange the order to suit your control strategy.
3/99 Function Block Reference Guide
Function Blocks
171