Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
Step 1: Open the Information Tab
Click on Information tab.
Screenshot: Information Tab
Step 2: Check the Software Version
This field returns the current version of software loaded onto the AXRX1 unit. When you do
an upgrade, you'll probably want to check here to see that the upgrade went well.
Step 3: Check the Serial Number
During a support call we'll often ask you for the Serial Number of your AXRX1. This is where
you find it.
Step 4: Check the MAC Address
Media Access Control Address (MAC) is reported by this field. You may need this if you are
involved in network operations with your AXRX1.
Step 5: Check the H264 Decoder Software Version
This field returns the current version of software loaded onto the H264 Decoder unit. When
you do an upgrade, you'll probably want to check here to see that the upgrade went well.
Revision 2.5
February 2015
Figure 6-39 Information Tab
User Guide – Ver. 2.5
Page 6-95
Advertisement
Table of Contents
