Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
Screenshot: Graph Pane
Step 4: Check the Scan Results
1. Look at the Scan Results pane – It will list any frequencies it has found that it is able to
tune for you.
2. Click the Tune to button for your required channel.
3. The Channel Details window opens. It tells you some things about the channel like its
frequency and bandwidth for example.
4. If you want the AXRX1 to tune to this channel, press the Yes button. This will save the
channel configuration parameters on the currently active configuration preset.
5. If you want the AXRX1 to remain on its current channel, then press the No button.
Revision 2.5
February 2015
Figure 6-37 Graph Pane
User Guide – Ver. 2.5
Page 6-93
Advertisement
Table of Contents
