Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
Step 7: Configure the Genlock Settings Pane
Screenshot: Genlock Settings Pane
No
Name
1
Genlock Mode
2
Offset Lines
3
Offset Pixels
Step 8: Use the Apply Button Consistently
Each time you change any parameter on the Control Application it is very important to
click the Apply button and wait for a moment for the changes to be sent to the device.
Many times people change a parameter and then wonder why the device has not changed
behaviour. Always click the Apply button.
Step 9 – About the Refresh Button
The browser software will check with the device every few seconds so it can update the
Control Pages with the latest changes.
To force a refresh of the control pages you'll need to click the Refresh Button.
Revision 2.5
February 2015
Figure 6-25 Genlock Settings Pane
Options
Off
External
Internal
0
0
Table 6-20 – Genlock Settings Pane Key
Notes
Off=Genlock switched off and systems is
not locked.
External=Using the Genlock source
connected to the external port on the back
of the receiver. This is normally your
stations reference black.
Internal=Using the receiver's own Genlock
source built into the unit.
Standard dependant. Enables you to apply
delay adjustment.
Standard dependant. Enables you to apply
delay adjustment.
User Guide – Ver. 2.5
Page 6-74
Advertisement
Table of Contents
