Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
No
Name
1
LO Frequency
(MHz)
2
LO Side
3
Invert
Revision 2.5
February 2015
Options
1720 or any valid
down converter
frequency.
Low or High
Checked or
Unchecked
Table 6-16 – Individual LO Settings Key
Notes
All our receiver units use down
converters to lower the frequency from
microwave (L, S and C-Band) to an
Intermediate Frequency (IF) between 51
and 858 MHz that the on-board tuners in
the receivers can use.
We get this information from the down
converter frequency and side table in
Appendix D – Reference Material.
We need to set which side (of the expected
incoming frequency) the LO frequency will
be.
We get this information from the down
converter frequency and side table in
Appendix D – Reference Material.
Checked=Inverted
Unchecked=Normal
The receivers can be used with other
manufacturer's products and sometimes this
requires us to change the polarity to
inverted to match this third party
equipment.
User Guide – Ver. 2.5
Page 6-67
Advertisement
Table of Contents
