Wave Central Axis Series User Manual page 85

Axis Series – RX User Guide
Software v2.0 and above
Figure 6-30 Demod 1 Configuration Panes
No Name
1 Frequency
(MHz)
2 4K Pedestal
3 Auto BW
Detect
4 Bandwidth
5 Guard Interval
6 Polarity
Table 6-22 – Demod 1 Configuration Pane Key
Revision 2.5
February 2015
Options Notes
2, 5.8, 6.4, 7.1GHz The frequency in megahertz (MHz) that you
want to use for this preset.
If you try to input a frequency that is out of
range, the radio will tune the nearest
available frequency automatically.
Lower or Upper DVBT only and if licensed for dual pedestal
mode. Selects which pedestal is
demodulated with the center frequency.
Off or On Narrowband only. When on, the receiver
will attempt to automatically detect the
bandwidth.
DVBT:6, 7 & 8MHz DVB-T bandwidths (normally used for
broadcast)
DVBT: The guard interval is a deliberate extension
of the RF symbol period to give immunity to
1/32, 1/16, 1/8,
reflections.
1/4
1/16, short extension, deals with fast
reflections, more data, less range.
1/8, long extension, deals with slower
reflections, less data, more range.
Normal The receivers can be used with other
manufacturer's products and sometimes this
Inverted
requires us to change the polarity to
Auto
inverted to match this third party
equipment.
If you select Auto the receiver will attempt
to automatically select the correct format
for you.
User Guide – Ver. 2.5
Page 6-82