Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
No
Name
11
BDC Gain
Offset
12
Individual LOs
Table 6-15 – Down converter Settings Pane Key
Step 3: Check the Individual LOs Checkbox
When checked, the extra fields which enable individual LO Frequencies are displayed. In
addition, you'll find a checkbox which enables you to invert the COFDM spectrum.
Screenshot: Down converter Settings Pane, Individual LOs Checked
Figure 6-21 Down converter Settings Pane with Individual LOs Checked
Revision 2.5
February 2015
Options
Notes
30 typically, but
Most down converters introduce gain to the
can be changed to
RF path. A 2 GHz BDC for example
10 dB.
introduces 30 dB gain in its standard mode
and can be changed to 10 dB, low gain
mode.
Optional BDC
for high and low gain operation.
Checked or
When unchecked the LO Frequency and LO
Unchecked
Side apply globally to all down converters
attached to the receiver.
When checked, new fields open up to
enable you to set individual LO Frequencies
and LO Sides for each down converter.
User Guide – Ver. 2.5
, provides external switching
Page 6-66
Advertisement
Table of Contents
