Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
No
Item
1
XLR 4 pin female connector POWER
12V 4A.
2
BNC female connectors x 8 marked 1
to 8.
3
HDMI Type-A 19 pin female connector
4
RJ45 8 pin female connector marked
ETHERNET.
5
D-Type 9 pin male connector marked
RS232 Data/Ctrl.
6
BNC female connectors marked SDI 1
and SDI 2.
7
LEMO 5 pin female connector marked
AUDIO 1 and AUDIO 2.
8
BNC female connectors marked
VIDEO 1 and VIDEO 2.
Revision 2.5
February 2015
Used for...
Power input to the AXRX1.
Connect your IF cables from the down
converter / antenna assembly here.
Do not over tighten. Hand-tight only.
HDMI (High Definition Multimedia
Interface) output.
Note: Not connected. Can be enabled
as a factory installed cost option.
Ethernet input / output.
You'll use this port to control your
AXRX1 using a web browser on your
PC.
It is also used for streaming video if
your unit is licensed for that.
RS232 Data/Control port.
Data output and enables you to
control the AXRX1 serially if required.
SDI video outputs, decoder 1 and 2.
Audio outputs, decoder 1 and 2.
Composite video outputs, decoder 1
and 2.
Table 2-2 – Rear Panel Key
User Guide – Ver. 2.5
Page 2-14
Advertisement
Table of Contents
