Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
Before you Begin
You'll need:
A fully powered AXRX1.
Step 1: Select the Status or Configuration Menu
1. On the front panel, press the Cancel/Back Button.
2. You'll see PRO-RX, Status on the display screen.
3. Pull the Joystick/Confirm Button down.
4. You'll see PRO RX, Config on the display screen.
5. You can cycle between Status and Config by moving the Joystick/Confirm button up
and down.
6. Choose Status.
7. Press the center of the Joystick/Confirm button to select the Status Menu.
8. Press the Cancel/Back button to go back up a menu level.
Revision 2.5
February 2015
User Guide – Ver. 2.5
Page 4-19
Advertisement
Table of Contents
