Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
No
Name
2
Preset Name
3
Unit Mode
4
Demod 1 Lock
Status
5
FPGA
Temperature
6
Date
7
Time
Step 3: Open the Input Sub-Tab
Click on, Status > Input tab.
Revision 2.5
February 2015
Options
Notes
1, 2, 3, 4, 5, 6, 7,
This is the configuration you are currently
8, 9, 10, 11, 12,
working on. Only 1 to 16.
13, 14, 15, 16
1x2-way
The configuration of the diversity and
channel arrangement of the receiver.
1x4-way
2x4-way etc
Locked or Not
Tells you if the unit has successfully
Locked
demodulated the incoming RF.
Any temperature
This field reports the current temperature of
on a green or red
the FPGA in degrees Celsius.
field background.
If the field background is green, the
temperature is within limits.
If the background shows red, then the
FPGA is overheating and the unit should be
switched off immediately.
It should be in the region of 50 to 80
degrees Celsius.
Any valid date.
Any valid time.
Table 6-2 – Overview Sub-Tab Key
User Guide – Ver. 2.5
Page 6-45
Advertisement
Table of Contents
