Wave Central Axis Series User Manual page 88

Axis Series – RX User Guide
Software v2.0 and above
No Name
11 Multicast
Address
12 Multicast Port
13 Descrambling
Mode
14 Descrambling
Keys
Table 6-23 – Decoder 1 Configuration Pane Key
Note: Demod 2 and Decoder 2 Configuration are set up exactly the same as Demod 1 and
Decoder 1.
Revision 2.5
February 2015
Options Notes
239.16.33.254 This text box enables you to change the
multicast address to be received by the
unit. The default value is 239.16.33.254.
10000 Protocols like TCP or UDP use port numbers
in the header to direct traffic around the
Range available is
network. Low port numbers are used by
1024-65535
computer systems for predefined tasks. For
example SMPT (for your email service) uses
port 25.
A good rule is to use numbers above
10,000 to avoid conflict with existing
services.
When you set up a port number on several
computers on a network they will all listen
for packets directed to that port.
The default value is 10333.
If you want to use descrambling you'll
select your mode here. You may not have
all the modes shown here as they are
licensable features.
Change Keys After selecting a Descrambling Mode, press
Button. this button to open the Enter Scrambling
Key dialog where you can set the key.
See
Encryption.
User Guide – Ver. 2.5
Advanced Operation, Setting up
Page 6-85