Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
Screenshot: Select the Encryption Mode
AXRX1
Step 2: Change the Descrambling Keys
The encryption key is a 128bit value for AES128 and a 256bit value for AES256, and is
entered as 32 or 64 ASCII hexadecimal characters (0..9, A..F).
1. Click on the Configuration tab.
2. Click the Change Keys button.
3. The Enter Scrambling Key dialog box opens.
4. In the Key Type drop-down box click the drop-down arrow and select the key type you
are trying to write. (Should match the key type you chose in
above).
5. In the AES128 key text box, type the encryption key you want to use.
6. Click the OK button.
7. The Scrambling Key Set box opens.
8. Click the OK button.
Revision 2.5
February 2015
Figure 5-1 Select the Encryption Mode
User Guide – Ver. 2.5
Select the Encryption Mode
Page 5-31
Advertisement
Table of Contents
