Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
No
Name
2
Default
Service
3
Default
Program ID
4
Service Select
Mode
5
Service List
6
Video PID
7
Audio PID
8
PCR PID
9
Data PID
10
IP Decoder
Mode
Revision 2.5
February 2015
Options
Notes
Up to 20 ASCII
The default is Unit 1. If the received stream
characters.
contains multiple services, this service
name will be checked for a match and used
as preference.
1 to 10
This sets which program number in the
transport stream will be used on initial
power up. If the received stream contains
multiple services, this program ID will be
checked for a match and used in
preference.
Defaults
This selects how services in the transport
stream will be selected.
List
Defaults – Uses Default Service name and
Manual PIDs
Program ID as set earlier.
List – Will show a list of available services
in Status > Service > Service List 1 or
2.
Manual PIDs - Enables you to select
particular elements from the transport
stream like alternate language audio.
H.264 Unit 1 for
If you have selected List in Service Select
example.
Mode earlier then this field will show a list
of available services on the current
Transport stream. The selected service
from the list will be decoded.
0x0020 to 0x1FFE
Set the manual Video service PID for
decoding
0x0020 to 0x1FFE
Set the manual Audio service PID for
decoding
0x0020 to 0x1FFE
Set the manual PCR PID for clock reference
0x0020 to 0x1FFE
Set the manual Data service PID for
decoding
UDP Unicast
Only available if you have selected IP In
under Decoder 1 input.
UDP Multicast
User Guide – Ver. 2.5
Page 6-84
Advertisement
Table of Contents
