Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
Screenshot: Demod 1 Pane, Show Details Checked
Figure 6-7 Demod 1 Pane with Show Details Checked
No
Name
1
Pre-Errors
2
Post-Errors
3
Packet Errors
Table 6-4 – Demod 1 Pane with Show Details Key
Step 6: Interpret the Transmitter 1 Pane
Some transmitters are capable of sending metadata in with the RF signal. This metadata has
to be switched on at the transmitter and then provides useful information at the receiver.
Revision 2.5
February 2015
Options
Notes
0 is ideal. Could
The bit error rate for pre-errors.
be any number.
0 is ideal. Could
The bit error rate for post-errors.
be any number.
0 is ideal. Could be
The number of packet errors coming out of
any number.
the error correction system.
Any error here will corrupt the video, audio
or data signals coming through the receiver.
User Guide – Ver. 2.5
Page 6-49
Advertisement
Table of Contents
